Arasur Multi Product Solutions

1.Self-check function
Usage:self-check before use, hold the pen in one hand, touch the touch electrode withthe other hand
Phenomenon: The green light is on, indicating that the electric Pen is fully charged. The light does not light up to indicate that the battery needs to be replaced
2.Detect power on
How to use:Hold the pen in one hand and place the touch electrode in the place where it is powered Phenomenon: The red and green lights of the live wire of the contact object are on, indicating that there is electricity,pay attention to safety, Contact object zero line green light on If the light is off, it means the object is out of power
3.Line on-off detection
Usage:touch one end ofthe wire with one hand, touch the other end of the wire with the electric pen
Phenomenon: the light on means the circuit is normal and not damaged, The light does not light up, indicating that there is a disconnection somewhere in the line
4.DC detection
Usage: The tip ofthe electric pen touches the positive pole of the
battery, and the other hand touches the negative pole of the battery Phenomenon: The light is on, indicating that the power is sufficient The light does not light up to indicate low or no power
2. Voltage detection
1.AC/DCvoltage detection range is 12-250V
2. When measuring non-ground direct current, the hand should touch the other electrode (such as the positive pole or negative)
3. Matters needing attention
1. This product should be protected from moisture, and the use environment should not exceed 50 degrees
2.A self-test is required before use, and the equipment can be used normally
3. The body is prohibited from touching the batch head during the live wire detection

Product Features:

• Wide spectral range.
• Excellent long term stability.
• Cosine corrected.
• Automatic transmission measurements.
• Select either power or transmission.
• Solar energy power or transmission.
• Current time setting function.
• User calibration factor setting function.
• End-mount light sensor.
• Select either W/m2 or Btu / (ft2*h) units
• Data Hold / MAX / AVG modes.
• Data Memory and Read function (99 sets)
• Auto Data memory (TES-1333)
• RS232 interface to PC (TES-1333R)(Not available in this model)
• Display 3-1/2 digits.Max.indication1999 Range 2000W/m 2 634Btu/(ft 2 * h) Resolution 1W/m21Btu/(ft2*h) Spectral response 400-1100nm Accuracy Typically within ± 10W/m2[ ±3 Btu / (ft2*h) ] or ±5% , whichever is greater in sunlight; Additional temperature induced error ±0.38W/m2 / [ ±0.12 Btu / (ft2*h)/ ] from 25 Angular accuracy Cosine corrected <5% for angles <60 ° Over-input Display shows" " Sampling Time Approx. 0.4 second Battery 4pcs size AAA Battery Life Approx. 100 hours Operating temp and humidity 0 to 50 below 80%RH Storage temp and Humidity -10 to 60 below 70% RH Weight Approx. 165g Dimension 111(L)*64(W)*34(H)mm